Vyair (0817) 11 Litre High Pressure Reinforced Long Life Resin Vessel

Available:In Stock

Wishlist Compare

£69.95

Item is supplied with Hoselock Clunk Click Hose Fittings (see images)

Resin vessels are used for the deionisation and purification of water. This resin vessel has a capacity of 11.0 litres, and used in conjunction with DI resin can produce top quality water which is suitable for any pure water application, including pole window cleaning, drinking water, aquatics, car valeting, gardening and hydroponics as well as fish keeping.

Features:

8" diameter, 17" high (excluding base and head)
11.0 litre capacity
Includes stand (base)
Choice of fittings included
Complete vessel, all parts included and assembled, such as the riser pipe, resin head, and internal parts. Hose fittings will require fitting (PTFE tape is supplied)
Complies with all requirements of P.E.D. 97/23/EC directive
Suitable for drinking water following KTW recommendations

Operating Specifications:

Maximum pressure: 10.5 bar (150 psi)
Maximum temperature: 49°C (120°F)
Minimum temperature 1°C (34°F)
Maximum vacuum: 127 mm Hg (5" Hg)
Vessel approved for water filtration use only
Vessel must not be exposed to temperature below -29°C (-20°F)

How to fill and connect a Vyair DI resin vessel

Remove the resin vessel from its packaging.
Apply 6-8 turns of PTFE sealing tape onto the thread of the fitting that is going to screw into the vessel head.
Ensure that all required fittings are installed before proceeding.
Unscrew the head from the resin vessel and pull upwards, you will notice that a plastic pipe is installed on the underside of the head.
Using a funnel, pour the resin into the vessel so the resin is halfway up the vessel.
Then tap the vessel down to compact the resin.
Again, using a funnel, add more resin into the vessel into the resin is level with the “shoulder” of the vessel.
Tap the vessel down again. (if the resin is not level with the “shoulder” of the vessel, then repeat steps 7-8 again until it is level).
Remove any resin from the threads of the vessel.
Next push the plastic pipe (that was removed during step 4) back into the vessel and screw the head back on the vessel body. Ensure that the plastic pipe is centered otherwise the head/lid will become cross-threaded and that the o ring is present on the head.
Next, connect your inlet & outlet pipes to the vessel (ensuring to follow the flow direction or “in” & “out” on the vessel head).
Turn the water supply to the vessel on and check for leaks.
If there are leaks on the fittings, please tighten the fitting or remove the leaking part and repeat steps 2-3.
The process is now complete.

This FRP tank is Tested and Certified by NSF International against NSF/ANSI Standard 44 for materials and structural integrity requirements.

Please Note: Fitting colour may differ from product image.

Features:

8" diameter, 17" high (excluding base and head)
11.0 litre capacity
Includes stand (base)
Choice of fittings included
Complete vessel, all parts included and assembled, such as the riser pipe, resin head, and internal parts. Hose fittings will require fitting (PTFE tape is supplied)
Complies with all requirements of P.E.D. 97/23/EC directive
Suitable for drinking water following KTW recommendations

Operating Specifications:

Maximum pressure: 10.5 bar (150 psi)
Maximum temperature: 49°C (120°F)
Minimum temperature 1°C (34°F)
Maximum vacuum: 127 mm Hg (5" Hg)
Vessel approved for water filtration use only
Vessel must not be exposed to temperature below -29°C (-20°F)

How to fill and connect a Vyair DI resin vessel

Remove the resin vessel from its packaging.
Apply 6-8 turns of PTFE sealing tape onto the thread of the fitting that is going to screw into the vessel head.
Ensure that all required fittings are installed before proceeding.
Unscrew the head from the resin vessel and pull upwards, you will notice that a plastic pipe is installed on the underside of the head.
Using a funnel, pour the resin into the vessel so the resin is halfway up the vessel.
Then tap the vessel down to compact the resin.
Again, using a funnel, add more resin into the vessel into the resin is level with the “shoulder” of the vessel.
Tap the vessel down again. (if the resin is not level with the “shoulder” of the vessel, then repeat steps 7-8 again until it is level).
Remove any resin from the threads of the vessel.
Next push the plastic pipe (that was removed during step 4) back into the vessel and screw the head back on the vessel body. Ensure that the plastic pipe is centered otherwise the head/lid will become cross-threaded and that the o ring is present on the head.
Next, connect your inlet & outlet pipes to the vessel (ensuring to follow the flow direction or “in” & “out” on the vessel head).
Turn the water supply to the vessel on and check for leaks.
If there are leaks on the fittings, please tighten the fitting or remove the leaking part and repeat steps 2-3.
The process is now complete.

This FRP tank is Tested and Certified by NSF International against NSF/ANSI Standard 44 for materials and structural integrity requirements.

Please Note: Fitting colour may differ from product image.

Christmas and New Year Posting Dates

We recommend ordering as early as possible for delivery before Christmas however we expect any orders placed before the 12pm cut-off on Friday 29th December to arrive before Christmas. We do not guarantee delivery times and refunds will not be offered for orders that suffer courier delays.

See below shipping dates over Christmas and New Year. Please note, 2nd January is a Scottish Bank Holiday so no orders will be shipped on this date. Furthermore as we will effectively have almost 4 days worth of orders when we return on Friday, please allow a little extra time for orders placed over the New Year period to be shipped.

Monday 23rd December - Shipping as normal
Tuesday 24th December - Closed (no shipping)
Wednesday 25th December - Closed (no shipping)
Thursday 26th December - Closed (no shipping)
Friday 27th December - Shipping as normal
Saturday 28th / Sunday 29th December - Closed
Monday 30th December - Shipping to 12pm
Tuesday 31st December - Closed (no shipping)
Wednesday 1st January - Closed (no shipping)
Thursday 2nd January - Closed (no shipping - Scottish Bank Holiday)
Friday 3rd January - Shipping as normal (expect delays)

Lastly, I hope you all have a wonderful Christmas and I want to wish you all the best for the upcoming New Year.

Imran

Postage, Packing and Insurance

in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland. Orders under £60 will be subject to a carriage charge unless otherwise specified. Carriage options and prices will be displayed at checkout (please see below for more information on services offered). Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).
Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday. Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday. We do not currently offer a Saturday delivery option.
Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE. Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day. Postal charge refunds will NOT be issued for delays caused by Couriers.
Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service. Please note - THIS IS NOT GUARANTEED. Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED
Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order. WE ARE CURRENTLY NOT SHIPPING TO EUROPE. Apologies for any inconvenience caused.
Carriage to Northern Ireland is displayed at checkout and will vary depending of the weight of the order.
We aim to dispatch all orders within 1 working day of being placed.
Carriage cost for all delivery options includes insurance for loss or damage in transit.
Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.
If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.