Clear Coat Ceramic Lite has been formulated to be the most versatile coating on the market. Offering durable, hydrophobic protection, enhancing the finish on Paint, Wheels, Glass, Trim, PPF, Vinyl and Carbon.
Ceramic Lite bridges the gap between a traditional ceramic coating and a spray sealant. The ethos of the product was to create something we could use on almost any finish or substrate, allowing protection on all surfaces with only one product.
Originally formulated as pre-sale protection on some of the most exclusive cars in the world, Clear Coat provides a durable, invisible protective layer on matte, satin & gloss finishes for up to 12 months.
Clear Coat can be applied outdoors in stable conditions, applied out of direct sunlight. Please allow 6 hours after application, before getting the coating wet.
Ceramic Lite can be used as a stand-alone protectant, or on top of existing ceramic coatings, extending durability or giving them a new lease of life.
Durability:
Clear Coat is durable for up to 12 months when maintained correctly, with an average of 5000 miles.
Specification:
- Chemical Resistant
- Ultra Hydrophobic (water and dirt repellant)
- 6 Hour Cure Time (before getting wet)
- Cost-effective (up to 25 cars or 25 coats)
- Suitable for outdoor application
- 250ml Bottle
Features:
- Fast, Easy Application
- Gloss boosting on Gloss finishes
- Enhancing the finish of Satin and Matte finishes
- Suitable on Paint, Wheels, Glass and Plastic Trim
- Apply on PPF, Vinyl, Carbon and Composite
- Easy to apply, ceramic coating-like results
Directions:
- Apply one spray onto one of our Speed Applicators.
- Coat one panel in straight overlapping lines.
- Ensure the coating is spread evenly across the whole panel.
- Remove excess immediately (10-20 seconds) with one of our Panel Wipe Microfibre Cloths.
- Repeat the process for maximum durability.
- Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Apply in temperatures above 5 degrees celsius, in a well-ventilated area.
Hints & Tips:
- If you find Clear Coat cures too fast, split larger sections like bonnets & roofs into sections (halves or quarters)
- If applying outside, stand with your back to the wind, spray away from the car, and spray into the speed applicator.
- Use a two full sprays to prime the applicator initially, then just one spray per panel.
- Hard to remove? You may be applying too much, a little goes a long way, ensure you are using a close loop microfibre (not plush)
- Missed a bit? You can top up at any time, just make sure the panel is clean & free from dust & dirt.
- Found a smear? Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Waxes are best to be removed before application, ideally you want Clear Coat to bond directly to the surface, or on-top of full ceramic coatings.
Clear Coat Ceramic Lite has been formulated to be the most versatile coating on the market. Offering durable, hydrophobic protection, enhancing the finish on Paint, Wheels, Glass, Trim, PPF, Vinyl and Carbon.
Ceramic Lite bridges the gap between a traditional ceramic coating and a spray sealant. The ethos of the product was to create something we could use on almost any finish or substrate, allowing protection on all surfaces with only one product.
Originally formulated as pre-sale protection on some of the most exclusive cars in the world, Clear Coat provides a durable, invisible protective layer on matte, satin & gloss finishes for up to 12 months.
Clear Coat can be applied outdoors in stable conditions, applied out of direct sunlight. Please allow 6 hours after application, before getting the coating wet.
Ceramic Lite can be used as a stand-alone protectant, or on top of existing ceramic coatings, extending durability or giving them a new lease of life.
Durability:
Clear Coat is durable for up to 12 months when maintained correctly, with an average of 5000 miles.
Specification:
- Chemical Resistant
- Ultra Hydrophobic (water and dirt repellant)
- 6 Hour Cure Time (before getting wet)
- Cost-effective (up to 25 cars or 25 coats)
- Suitable for outdoor application
- 250ml Bottle
Features:
- Fast, Easy Application
- Gloss boosting on Gloss finishes
- Enhancing the finish of Satin and Matte finishes
- Suitable on Paint, Wheels, Glass and Plastic Trim
- Apply on PPF, Vinyl, Carbon and Composite
- Easy to apply, ceramic coating-like results
Directions:
- Apply one spray onto one of our Speed Applicators.
- Coat one panel in straight overlapping lines.
- Ensure the coating is spread evenly across the whole panel.
- Remove excess immediately (10-20 seconds) with one of our Panel Wipe Microfibre Cloths.
- Repeat the process for maximum durability.
- Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Apply in temperatures above 5 degrees celsius, in a well-ventilated area.
Hints & Tips:
- If you find Clear Coat cures too fast, split larger sections like bonnets & roofs into sections (halves or quarters)
- If applying outside, stand with your back to the wind, spray away from the car, and spray into the speed applicator.
- Use a two full sprays to prime the applicator initially, then just one spray per panel.
- Hard to remove? You may be applying too much, a little goes a long way, ensure you are using a close loop microfibre (not plush)
- Missed a bit? You can top up at any time, just make sure the panel is clean & free from dust & dirt.
- Found a smear? Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Waxes are best to be removed before application, ideally you want Clear Coat to bond directly to the surface, or on-top of full ceramic coatings.
Postage, Packing and Insurance
-
in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland. Orders under £60 will be subject to a carriage charge unless otherwise specified. Carriage options and prices will be displayed at checkout (please see below for more information on services offered). Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).
-
Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday. Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday. We do not currently offer a Saturday delivery option.
-
Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE. Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day. Postal charge refunds will NOT be issued for delays caused by Couriers.
-
Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service. Please note - THIS IS NOT GUARANTEED. Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED
-
Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order. WE ARE CURRENTLY NOT SHIPPING TO EUROPE. Apologies for any inconvenience caused.
-
Carriage to Northern Ireland is displayed at checkout and will vary depending of the weight of the order.
-
We aim to dispatch all orders within 1 working day of being placed.
-
Carriage cost for all delivery options includes insurance for loss or damage in transit.
-
Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.
-
If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.
In the unlikely event that goods ordered do not arrive within the expected time frame please contact us.