Gtechniq G1 ClearVision Smart Glass

Available:In Stock

Wishlist Compare

£12.95

Why use Gtechniq G1 ClearVision Smart Glass?

Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability.

G1's excellent durability and exceptionally low smear characteristics make it ideal for car windscreens.

Please note that with glass coatings there is a trade off between durability and functionality. Whilst G1 is recommended for car windscreens, for surfaces such as shower screens, or marine glass where maximum repellency is required, it is better to use G5 Water Repellent Coating for Glass and Perspex.

Please also note that G1 will only work on glass substrates so, for example, it will not work on modern headlight lenses which are made from polycarbonate. For these you will need to use G5 Water Repellent for Glass and Perspex.

Please also note that G2 is included with the G1 for no extra cost.

Use and storage:

Apply at a temperature above 5 degrees celsius and not in direct sunlight
If you are applying indoors ensure that there is adequate ventilation
Ensure that the surface to be coated is entirely free from fats/oils - cleaning and then polish the glass Gtechniq G4 Nanotech Glass Polish
We recommend three coatings on windscreens and a single coating on side and rear screens
Apply using the applicator pad to the windscreen from drivers side to passenger side. And without removing the residue repeat this application from the drivers side to the passenger side. Once you have two coats on the windscreen, continue to apply the product to the side and rear screens followed by a third coat to your windscreen

If ambient conditions are below 15 celsius allow the coating to cure for 30 minutes and if above 15 celsius allow to cure for 15 minutes only. NB if your glass is very cold, we also recommend to heat up your windscreen using your vehicle's demist function.
Once cured (you should see an opaque film of excess product on the surface), use another lint free cloth to apply the G2 Residue Remover and then buff using a cotton towel type cloth so that you are left with a clear smear free finish. (Cotton is preferable to microfiber as the densely packed fibers of the microfiber cloth may remove too much of the partially cured coating from the surface)
We recommend buffing areas no bigger than quarter of a windscreen or half a side window at a time
On application of G1 wiper blades should be thoroughly cleaned with IPA or window cleaner, alternatively replace the wipers if they are towards the end of their lifecycle as if the blades are soiled they can judder on the surface. We also recommend applying G1 to the blades without removing residue
Once coated do not expose your car to the elements for at least 3 hours
The coating requires no special maintenance or screen wash and it should last for approximately 20,000 miles of regular driving
There may be some wiper blade judder on the first application of the product, in 90% of cases this will disappear in one or two weeks
G1 and G2 have a shelf life of 2 years from purchase, for best result, use within 3 months of opening

Why use Gtechniq G1 ClearVision Smart Glass? Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability. G1's excellent durability and exceptionally low smear characteristics make it ideal for car windscreens. Please note that with glass coatings there is a trade off between durability and functionality. Whilst G1 is recommended for car windscreens, for surfaces such as shower screens, or marine glass where maximum repellency is required, it is better to use G5 Water Repellent Coating for Glass and Perspex.

Use and storage:

Apply at a temperature above 5 degrees celsius and not in direct sunlight
If you are applying indoors ensure that there is adequate ventilation
Ensure that the surface to be coated is entirely free from fats/oils - cleaning and then polish the glass Gtechniq G4 Nanotech Glass Polish
We recommend three coatings on windscreens and a single coating on side and rear screens
Apply using the applicator pad to the windscreen from drivers side to passenger side. And without removing the residue repeat this application from the drivers side to the passenger side. Once you have two coats on the windscreen, continue to apply the product to the side and rear screens followed by a third coat to your windscreen

If ambient conditions are below 15 celsius allow the coating to cure for 30 minutes and if above 15 celsius allow to cure for 15 minutes only. NB if your glass is very cold, we also recommend to heat up your windscreen using your vehicle's demist function.
Once cured (you should see an opaque film of excess product on the surface), use another lint free cloth to apply the G2 Residue Remover and then buff using a cotton towel type cloth so that you are left with a clear smear free finish. (Cotton is preferable to microfiber as the densely packed fibers of the microfiber cloth may remove too much of the partially cured coating from the surface)
We recommend buffing areas no bigger than quarter of a windscreen or half a side window at a time
On application of G1 wiper blades should be thoroughly cleaned with IPA or window cleaner, alternatively replace the wipers if they are towards the end of their lifecycle as if the blades are soiled they can judder on the surface. We also recommend applying G1 to the blades without removing residue
Once coated do not expose your car to the elements for at least 3 hours
The coating requires no special maintenance or screen wash and it should last for approximately 20,000 miles of regular driving
There may be some wiper blade judder on the first application of the product, in 90% of cases this will disappear in one or two weeks
G1 and G2 have a shelf life of 2 years from purchase, for best result, use within 3 months of opening

Christmas and New Year Posting Dates

We recommend ordering as early as possible for delivery before Christmas however we expect any orders placed before the 12pm cut-off on Friday 20th December to arrive before Christmas. We do not guarantee delivery times and refunds will not be offered for orders that suffer courier delays.

See below shipping dates over Christmas and New Year. Please note, 2nd January is a Scottish Bank Holiday so no orders will be shipped on this date. Furthermore as we will effectively have almost 4 days worth of orders when we return on Friday, please allow a little extra time for orders placed over the New Year period to be shipped.

Monday 23rd December - Shipping as normal
Tuesday 24th December - Closed (no shipping)
Wednesday 25th December - Closed (no shipping)
Thursday 26th December - Closed (no shipping)
Friday 27th December - Shipping as normal
Saturday 28th / Sunday 29th December - Closed
Monday 30th December - Shipping to 12pm
Tuesday 31st December - Closed (no shipping)
Wednesday 1st January - Closed (no shipping)
Thursday 2nd January - Closed (no shipping - Scottish Bank Holiday)
Friday 3rd January - Shipping as normal (expect delays)

Lastly, I hope you all have a wonderful Christmas and I want to wish you all the best for the upcoming New Year.

Imran

Postage, Packing and Insurance

in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland. Orders under £60 will be subject to a carriage charge unless otherwise specified. Carriage options and prices will be displayed at checkout (please see below for more information on services offered). Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).
Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday. Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday. We do not currently offer a Saturday delivery option.
Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE. Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day. Postal charge refunds will NOT be issued for delays caused by Couriers.
Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service. Please note - THIS IS NOT GUARANTEED. Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED
Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order. WE ARE CURRENTLY NOT SHIPPING TO EUROPE. Apologies for any inconvenience caused.
Carriage to Northern Ireland is displayed at checkout and will vary depending of the weight of the order.
We aim to dispatch all orders within 1 working day of being placed.
Carriage cost for all delivery options includes insurance for loss or damage in transit.
Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.
If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.