Latest Products
Bilt-Hamber TOUCH-LESS is a renewable sugar-based biodegradable snow foam pre-wash that delivers excellent cleaning and free rinsing properties. Ideal before use of TOUCH-ON coating/shampoo.
TOUCH-LESS cleans without the use of petrochemical surfactants, solvents,phosphates, caustics, NTA, preservatives or biocides. Includes powerful corrosion.
Directions and notes, read before use:
HOW TO USE
TOUCH-LESS may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 0.5% PIR (Panel Impact Ratio) and up to 2% for very dirty vehicles. Where application is through trigger spray or pump spray, the dilution calculation is easy to achieve, however, for application with pressure equipment it is essential to determine the amount of water being delivered to the equipment reservoir. Use the following method to calculate
Step 1 Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.
Step 2 The following calculations will achieve 2% dilution; Measure the total amount collected and multiply this number by 0.02 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.
Step 3 Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments.
Step 4 Apply touchless to entire vehicle or panel by panel. Allow to soak for 1-5 minutes (but never allow to dry). Power-wash off.
It is not necessary to use all diluted touch-less in one wash. One litre of diluted product should last 4-5 washes. Apply to cool panels in shaded conditions. Do not allow this product to dry in use. Keep the bottle neck and lid clean.
Bilt-Hamber TOUCH-LESS is a renewable sugar-based biodegradable snow foam pre-wash that delivers excellent cleaning and free rinsing properties. Ideal before use of TOUCH-ON coating/shampoo.
TOUCH-LESS cleans without the use of petrochemical surfactants, solvents,phosphates, caustics, NTA, preservatives or biocides. Includes powerful corrosion.
Directions and notes, read before use:
HOW TO USE
TOUCH-LESS may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 0.5% PIR (Panel Impact Ratio) and up to 2% for very dirty vehicles. Where application is through trigger spray or pump spray, the dilution calculation is easy to achieve, however, for application with pressure equipment it is essential to determine the amount of water being delivered to the equipment reservoir. Use the following method to calculate
Step 1 Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.
Step 2 The following calculations will achieve 2% dilution; Measure the total amount collected and multiply this number by 0.02 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.
Step 3 Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments.
Step 4 Apply touchless to entire vehicle or panel by panel. Allow to soak for 1-5 minutes (but never allow to dry). Power-wash off.
It is not necessary to use all diluted touch-less in one wash. One litre of diluted product should last 4-5 washes. Apply to cool panels in shaded conditions. Do not allow this product to dry in use. Keep the bottle neck and lid clean.
Postage, Packing and Insurance
-
in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland. Orders under £60 will be subject to a carriage charge unless otherwise specified. Carriage options and prices will be displayed at checkout (please see below for more information on services offered). Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).
-
Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday. Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday. We do not currently offer a Saturday delivery option.
-
Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE. Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day. Postal charge refunds will NOT be issued for delays caused by Couriers.
-
Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service. Please note - THIS IS NOT GUARANTEED. Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED
-
Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order. WE ARE CURRENTLY NOT SHIPPING TO EUROPE. Apologies for any inconvenience caused.
-
Carriage to Northern Ireland is displayed at checkout and will vary depending of the weight of the order.
-
We aim to dispatch all orders within 1 working day of being placed.
-
Carriage cost for all delivery options includes insurance for loss or damage in transit.
-
Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.
-
If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.
In the unlikely event that goods ordered do not arrive within the expected time frame please contact us.
